د.إ 0.00
D-5633NS
An aviation grade aqueous based surface preparation cleaner for aircraft surfaces
Features
-
- Non-toxic, biodegradable, and contains no quantities of any reportable chemical under SARA Title III
- Replaces chlorinated, petroleum distillate, terpene based, and hydrocarbon/surfactant blend solvents
- Designed for use at ambient temperatures
- Formulated using Attar-C™ as the main ingredient
- Non-flammable with a mild odor and no special storage or handling requirements
- 100% water soluble
- Safe on all metal and composite surfaces
- Contains a low VOC (<250 g/L) (2.0 lbs/gal)
- Metal & composite surfaces
- General aircraft surfaces that are contaminated with very heavy deposits of oil, grease, hydraulic fluids, or baked-on carbon residues
- Wipe down applications for thrust reversers or body panels
- In some cases, utilization of a non-metallic brush or a cloth is recommended to agitate the material.
- For extremely soiled areas, a 5-10 minute dwell time may be required.
- If D-5633NS is used to prepare a surface, a water rinse after application is recommended.
- Pre-test D-5633NS for substrate compatibility prior to use.
- D-5633NS can be used in conjunction with the Formit® extensions to provide targeted spray to areas that may be difficult to reach but need to be coated. Please refer to our Formit® technical data sheet for more information.
- Bulk application available as ZC-633.
- ARP 1755 B (Attar-C™)
- Boeing CSD Number 1 (Attar-C™)
- Boeing D6-17487 (Attar-C™)
- Color: Pale Yellow
- Flash Point: None
- Freeze-Thaw: Stable
- Solubility In Water: 100% Soluble
- Specific Gravity: 0.9
- VOC’s: 2.06 LB/GL (246G/L)
- 16 fl oz (473 ml) Aerosol (002069)