د.إ 0.00
Jet-Brite™ 550
A drywash and polish paste for exterior aluminium & painted surfaces
Features
-
- A light pink/tan color
- Cleans, removes oxidation, and restore luster to aluminum and painted surfaces in a one-step process
- Safe on bare metal and painted surfaces, fiberglass, plexiglass, and molded plastic due to its nonabrasive formulation
- Leaves no residues or foreign matter on the substrate
- Impervious to fuels, oils, and hydraulic fluids
- Does not contain abrasives or corrosives
- Substitutes for harsh compounds that scratch and dull fine finishes
- Contains no wax, silicone, or polymers that can cause post operation coating problems
- Imparts an oxide resistant finish when properly applied
- Used for all painted surfaces and bare metals of aircraft.
- Apply Jet-Brite™ 550 to small sections with a soft cotton cloth or buffing wheel. Rub lightly so that the removal of oxide and carbon buildup will be visible.
- Use a clean and soft cotton cloth or buffing wheel to remove the paste while the cloth or buffing wheel is moist.
- Buff to a high luster finish.
- Excellent results can be obtained on leading edges, spinners, windows, galleys, lavatories, hardware, and carbon stained areas.
- Jet-Brite™ 550 should be applied over new paint only after the paint has fully cured. Please consult your paint supplier for guidelines on full cure of the paint to be covered with Jet-Brite™ 550.
- AMS 1650B Type 2 paste
- Boeing CSD#1
- Boeing Dz-17487 Rev L
- Color: Light Pink/Tan
- Consistency: Homogeneous Paste
- Flash Point: 220°F (104°C) Seta Closed Cup
- Odor: Mild Mineral Spirit Odor
- Specific Gravity: 1.09
- 1 Pound (453.5 g) Jars (002143)
- 5 Gallon (18.9L) Pail (004711)
- 55 Gallon (208L) Drum (008816)