د.إ 0.00
ZC-440
A dry film lubricant for lubrication of tracks
Features
-
- A fluorocarbon telomer that is chemically similar to the PTFE-fluorocarbon resin
- Due to its chemical inertness and ability to withstand temperatures from the cryogenic range up to 240°F (116°C), ZC-440 finds many uses throughout the aircraft
- Designed primarily for use as a dry film lubricant or mold release
- Withstands temperatures from cryogenic to 500°F (260°C) continuously
- Does not run or stain and is excellent for wood, plastic, rubber, paper, and metal
- Lubricates metal surfaces and prevents corrosion on them
- Non-conductive and chemically inert in use
- Non-flammable
- Provides excellent anti-stick properties
- Does not attract dirt or dust
- Effective release agent for epoxies, polyurethanes, etc
- Provides highest adhesion to the substrate while providing a good release or lubricating properties
- Replaces grease applications where the grease must be constantly changed out because of accumulation of debris
- Provides lubrication without the build-up of debris from greases and oils
- Use on aircraft and metal surfaces Agitate this material if it is used in bulk form. Apply to cold or warm surfaces (less than 240°F (116°C)). Apply on slat tracks, flap tracks, and jackscrews Aerosol application available as D-5440NS
- Coefficient of Friction: 0.06 to 0.09 (Static)
- Density: 7.7 lbs/gal (923 g/L)
- Fungal Growth per Fed-STD-810 Method 508.7: 0 (No Microbial Growth)
- Intermittent Temperature: 240°F (116°C)
- Melting Point: 572°F (300°C)
- Service Temperature: 180°F (82°C)
- Softening Point: 510°F (265°>C)
- Case of 12 each Quart (946 ml) (009660)
- Case of 4 each Gallon (4 each of 3.8L) Cans (007070)
- 5 Gallon (18.9L) Pail (007071)
- 55 Gallon (208L) Drum (007072)