د.إ 0.00
Cor-Ban® 22
A maximum penetrating, heavy duty and self-healing film for dissimilar metals.
Features
- The finished coating is soft and self healing
- Cor-Ban® 22 formula is based on the Cor-Ban® 27L CIC
- Provides additional barrier protection for corrosion prone internal steel bores of horizontal pivot shafts and landing gear bogies
- A military approved CIC for stopping corrosion on pre-corroded metal parts
- Highly penetrating formula delivers the corrosion protection of Cor-Ban® 27L into faying surfaces
- Preferred CIC for routine maintenance
- Free of chromates
- Free from heavy metals
- Low toxicity
- Long lasting
- Detectable Film
- > 4000 Hours of Salt Spray
- No Cracking or Flaking to -60°F (-51°C)
- Non-Sagging Film
- Solvent Removable
- Displaces Water
- Use on areas that are already corroded and prevent further corrosion from occurring.
- Apply by conventional airless or air-operated spray equipment.
- Use on landing gear equipment and hardware that is not primed or top coated
- Apply over pre-existing corrosion.
- The coating can be applied as thin as 1 mil (25 microns) film thickness to achieve the desired corrosion protection.
- Aerosol application is available
- The Cor-Ban® 22 aerosol can be used in conjunction with the Formit® extensions to provide targeted spray to areas that may be difficult to reach but need to be coated. Please see our Formit® technical data sheet for more information.
- All properties represented were achieved with a wet film thickness of 1.0 mils (25 microns). This wet film thickness can be measured with Zip-Chem® ’s Wet Film Thickness Gauge.
- One aerosol can covers approximately 90 ft2 (8.3 m²).
- Paste application of Cor-Ban® 22 is available as Cor-Ban® 27L
- Color: reddish-brown
- Compatibility Cd, Mg, AI: Pass
- Corrosion Resistance ASTM B-117: >4000 hours on Steel
- Flash Point: 105°F (40°C)
- Fungal Growth per Fed-STD-810 Method 508.7: 0 (No Microbial Growth)
- Low Temp Flaking: Pass
- Material VOC: 538 g/L (4.4 Lbs/Gal)
- Non-Volatiles: 33%
- Penetration: BMS 3-23F pass
- Solvent Type: Aliphatic
- Specific Gravity: 0.82
- Water Displacement: 0% Rust
- Water Resistance: Pass
- Case of 12 of 16 fl oz (473 ml) Aerosols (007047)
- Case of 4 each Gallon (4 each of 3.8L) Cans (009400)
- 5 Gallon (18.9L) Pail (007049)
- 55 Gallon (208L) Drum (007050)