Name: Cor-Ban® 23 Enhanced Dye
SKU: 3755
Availability: InStock

د.إ 0.00

A long lasting, high penetration, and water displacing CIC for aircraft substrates.

Cor-Ban^® 23 Enhanced Dye offers the fast dry time and thin film as well as inhibition
Cor-Ban^® 23 Enhanced Dye has a stronger dye than regular Cor-Ban^® 23
Free of chromates
Free from heavy metals
Low toxicity
Long Lasting
Water Displacing
Non-Sagging Film
High Penetration
Fast Drying Non-Tacky Film
Detectable Film
Non-Cracking and Non-Flaking to -65°F (-54°C)
Solvent Removable
> 3000 Hours Salt Spray
Very low dry film weight <0.3 mil (8 microns) required to surpass specification

SKU: N/A Tag: Zipchem

1. High profile aircraft substrates
2. Upper edge floor beams
3. Wheel wells
4. Pressure deck
5. Center wing sections

Apply by conventional airless or air-operated spray equipment.
Aerosol application is also available.
The Cor-Ban^® 23 Enhanced Dye aerosol can be used in conjunction with the Formit^® extensions to provide targeted spray to areas that may be difficult to reach but need to be coated. Please refer to our Formit^® technical data sheet for more information.
All properties represented were achieved with a dry film thickness of range 0.3 – 0.5 mils (7-12 microns).
The wet film will self level to achieve the desired dry film thickness when applied to an inclined surface.
One aerosol can covers approximately 160 ft² (14.9 m²).
One gallon (3.8L) of bulk material covers approximately 2290 ft² (56.2 m²/liter)

Airbus: AIMS 09-08-001 (Type I Grade 3)
Bombardier: BAMS 565-006 Type V
Boeing: BMS 3-23J Type II Class 2 Grade A & B (QPL) (Use in place of Airbus CML 15-006)
Boeing: BMS 3-35
Fed-Ex E.O. 9-5100-7-5001

Cor-Ban® 23 Enhanced Dye

Reach Out To Us