د.إ 0.00
Cor-Ban® 23 Undyed
A long lasting, high penetration, and water displacing CIC for aircraft substrates.
Features
- A long lasting, high penetration, and water displacing corrosion inhibiting compound
- Free of chromates
- Free from heavy metals
- Low toxicity
- Water displacing and fast drying
- Contains a non-sagging and non-tacky film
- Contains a transparent film
- Non-cracking and non-flaking to -65°F (-54°C)
- Solvent removable
- Contains a very low dry film weight <0.4 mil (10 microns) required to surpass specification
- >3000 hours salt spray
- High penetration
- Intended for use on :
-
- High profile aircraft substrates
- Upper edge floor beams
- Wheel wells
- Pressure deck
- Center wing sections
- Apply by conventional airless or air-operated spray equipment.
- Aerosol application is also available
- The Cor-Ban® 23 Undyed aerosol can be used in conjunction with the Formit® extensions to provide targeted spray to areas that may be difficult to reach but need to be coated. Please refer to our Formit® technical data sheet for more information.
- All properties represented were achieved with a dry film thickness of range 0.3 – 0.5 mils (7-12 microns).
- The wet film will self level to achieve the desired dry film thickness when applied to an inclined surface.
- One aerosol can covers approximately 160 ft2 (14.9 m2) and one gallon (3.8L) of bulk material cover approximately 2290 ft2 (56.2 m2/liter).
- Cessna CSNP038 Type IVB Class 1 (QPL)
- Color: Clear and Transparent
- Drying Time: <1 hour
- Exfoliation: Pass at -65°F (-54°C)
- Flash Point: 114°F (46°C)
- Low Temp Flaking: Pass
- Non-Volatiles: 42%
- Penetration: >4 inches per hours per BMS 3-35
- Salt Spray Protection: >3000 hours on aluminum
- Specific Gravity: 0.88
- Viscosity: 26 cps.
- Water Displacement: 0% Rust
- Case of 12 fl oz (355 ml) Aerosols (100848)
- Case of 4 Each Gallon (3.8L) Cans (100847)
- 5 Gallon (18.9L) Pail (101013)
- 55 Gallon (208L) Drum (101428)