د.إ 0.00
Cor-Ban® 50
A cold application corrosion preventive compound for painted/unpainted metal surfaces
Features
-
- A dark brown, thixotropic liquid corrosion inhibiting compound intended for heavy duty use
- Free of chromates
- Free from heavy metals
- Low toxicity
- A solvent cut-back formulation which dries in approximately two hours
- Forms a firm, amber, transparent film which will not flow below 175°F (79°C)
- Wets the surfaces of most commonly used metals
- Non-corrosive
- Protects painted and unpainted metal surfaces
- Intended for use on :Apply Cor-Ban® 50 by spray, dip, or brush in the temperature range of 50°F to 100°F (10°C to 38°C). A gallon of this material will cover approximately 800 square feet (74.3 m²) at a film thickness of 1 mil (25 microns) thick. For areas requiring penetration, pretreat areas with Cor-Ban® 35 and then cover with Cor-Ban® 50. One aerosol of Cor-Ban® 50 covers approximately 95 ft2 (8.8 m²) The Cor-Ban® 50 aerosol can be used in conjunction with the Formit® extensions to provide targeted spray to areas that may be difficult to reach but need to be coated. Please refer to our Formit® technical data sheet for more information. Painted and unpainted metal surfaces
- MIL-PRF-16173, Grade 4
- Compatibility with Aluminum: Pass
- Compatibility with Brass: Pass
- Compatibility with Cadmium: Pass
- Compatibility with Magnesium: Pass
- Compatibility with Steel: Pass
- Compatibility with Zinc: Pass
- Flash Point, Pmcc,° F: 110°F (44°C)
- Flow Point, 4 Hours at 175°F (80°C): Pass
- Humidity Cabinet Hours: >1000 hrs
- Low Temperature Adhesion: No Flaking
- Non-Volatile Content % : 55
- Removable With Solvent: Yes
- Salt Spray On Steel: > 700 hrs
- Type of Solvent: Aliphatic Hydrocarbon
- Viscosity: 400 cps
- 16 fl oz (473 ml) Aerosol (007896)
- Case of 4 of Gallon (4 each of 3.8L) Cans (009411)
- 5 Gallon (18.9L) Pails (007872)
- 55 Gallon (208L) Drums (007873)