د.إ 0.00
Calla® 602LF
A non-emulsion type cleaner for aqueous parts washers
Features
-
- A concentrated cleaner for use in aqueous parts washing cabinets
- Use at 5% dilution
- Low foaming at temperatures as low as 140°F (60°C)
- Low VOC formulation
- Short term emulsifier
- Safe on aircraft substrates including magnesium, IVD aluminum coated steel, cadmium plated steel, aluminum, titanium, and other high strength materials
- Removes dirt and grease from parts with cycle times as low as 3 minutes
- Use in the strictest air quality control regulations
- Allows for easy separation of the greases and oils from the waste stream
- Use in aqueous parts washing cabinets. The operating temperature of Calla® 602LF is 140°F-160°F (60°C-71°C). For optimum cleaning efficiency, the recommended dilution of the product is 5%. 100 Gallon (378.5L) Tank Parts Washer: Add 5 gallons (18.9L) of Calla® 602LF and top off by adding the remaining water balance. Cleaning cycle time is usually 3-15 minutes. Apply Calla® 602LF Defoamer to solution to reduce foam if too much of it is generated.
- Meets Mil-C-29602 except section 3.7 (pH)
- NSN: 6850-01-513-5230 (1 Gallon (3.8L) Bottle)
- NSN: 6850-01-513-5237 (5 Gallon (18.9L) Pail)
- NSN: 6850-01-513-5233 (55 Gallon (208L) Drum)
- Source Control Drawing 9825019-17, -19 & -21 Rev. C (Meets all requirements)
- T.O. 4W-1-161 (Meets all requirements)
- T.O. 4B-1-32 (Meets all requirements)
- T.O. 4S-1-182 (Meets all requirements)
- Density: 8.5 lbs/gal (1018 g/L)
- Flash Point: No Flash Point
- Non-Volatiles: 20%
- Operating Temperature: 140°F-160°F (60°C-71°C)
- pH: 6.5 – 8.0
- Surface Tension (dynes/cm): 20 (For 5% Solution)
- Case of 4 each Gallon (4 each of 3.8L) Bottles (009437)
- 5 Gallon (18.9L) Pail (008935)
- 55 Gallon (208L) Drum (008936)
- 330 Gallon (1249L) Tote (008937)